Configure your Exchange 2013 server with Configure-Echange2013.ps1 Updated to V3.2

Updated to V3.2

Change List:

# V1.0 Begin
# V1.1 Added Some New Options 12-10-2014
# V1.2 Added Hyper-V Best Practise & NTFS Partition Offset
# V1.3 Added KB2995145 .NET Framework 4.5 garbage collector heap Fix
# V1.4 Added Set Minimum Disk Space Warning level (180GB Default CU6 200GB CU5)
# V1.5 Added Some new features
# V1.6 Changed the Layout & Add Move Arbitration Mailbox
# V1.7 Added PST Export & KB2990117
# V1.8 Added Full backup, Database in GB and Mailbox Size in GB Export CSV
# V1.9 Added Outlook AnyWhere & SafetyNetHoldTime
# V2.0 Added Check DatacenterActivationMode, Get-DatabaseAvailabilityGroupNetwork, Add Static Route, Disable Replation Network on DAG, Database Copies Per Volume (AutoReseed)
# V2.1 Added Edge Subscription
# V2.2 Added Check Transaction Log Growth
# V2.3 Changed the Menu to Submenu’s
# V2.4 Added Check Database White Space
# V2.5 Added MAPI HTTP External URL
# V2.6 Fixed OWA Virtual URL & HTTP URL
# V2.7 Added Fixes & Mountpoints & Changed Set Minimum Disk Space Warning Level from REG to GlobalOverride
# V2.8 Maintaince Added
# V2.9 Set Power to Highperformance
# V3.0 Check of Microsoft.Exchange.Management.PowerShell.SnapIn is loaded
# V3.1 Added Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:*.domain.com & Set-OutlookProvider -Identity EXCH -CertPrincipalName msstd:*.domain.com
# V3.2 VMware Best Practises & Fixed soms things

Download: https://gallery.technet.microsoft.com/scriptcenter/Configure-Exchange-2013-e0ffb2a6

MDT 2013 Update 2 Automatically move computers to the right OU.

On December 2010 i wrote an article: automatically move computers to the right OU.
In MDT 2012 update 1 this was an issue: MDT 2012 settings per task sequence

In MDT 2013 Update 2 this is still a issue:

How to fix:

I changed DeployWiz_SelectTS.vbs file and it work again Glimlach

1. Edit DeployWiz_SelectTS.vbs
2. Add after “Dim sTemplate”
Dim sCmd
Set Oshell = createObject(“Wscript.shell”)
3. Add before “End Function” (bottom of page)
sCmd = “wscript.exe “”” & oUtility.ScriptDir & “\ZTIGather.wsf”””
oItem = oSHell.Run(sCmd, , true)

Download DeployWiz_SelectTSMDT2013Update2.7z

Don’t forget to change every TaskSequence

clip_image002

Setup MDT 2013 (Update 2) to encrypt Windows 10 devices (Laptops) automaticlly

This  will show you how to configure your environment for BitLocker, the disk volume encryption built into Windows 10 Enterprise and Windows 10 Pro, using MDT. BitLocker in Windows 10 has two requirements in regard to an operating system deployment:

  • A protector, which can either be stored in the Trusted Platform Module (TPM) chip, or stored as a password.
  • To configure your environment for BitLocker, you will need to do the following:
  1. Configure Active Directory for BitLocker.
  2. Download the various BitLocker scripts and tools.
  3. Configure the rules (CustomSettings.ini) for BitLocker.

Configure Active Directory for BitLocker

To enable BitLocker to store the recovery key and TPM information in Active Directory, you need to create a Group Policy for it in Active Directory. For this section, we are running Windows Server 2012 R2, so you do not need to extend the Schema. You do, however, need to set the appropriate permissions in Active Directory.

Note
Depending on the Active Directory Schema version, you might need to update the Schema before you can store BitLocker information in Active Directory.

In Windows Server 2012 R2 (as well as in Windows Server 2008 R2 and Windows Server 2012), you have access to the BitLocker Drive Encryption Administration Utilities features, which will help you manage BitLocker. When you install the features, the BitLocker Active Directory Recovery Password Viewer is included, and it extends Active Directory Users and Computers with BitLocker Recovery information.

figure 2

Figure 2. The BitLocker Recovery information on a computer object in the contoso.com domain.

Add the BitLocker Drive Encryption Administration Utilities

The BitLocker Drive Encryption Administration Utilities are added as features via Server Manager (or Windows PowerShell):

  1. On DC01, log on as CONTOSO\Administrator, and, using Server Manager, click Add roles and features.
  2. On the Before you begin page, click Next.
  3. On the Select installation type page, select Role-based or feature-based installation, and click Next.
  4. On the Select destination server page, select DC01.contoso.com and click Next.
  5. On the Select server roles page, click Next.
  6. On the Select features page, expand Remote Server Administration Tools, expand Feature Administration Tools, select the following features, and then click Next:
    1. BitLocker Drive Encryption Administration Utilities
    2. BitLocker Drive Encryption Tools
    3. BitLocker Recovery Password Viewer
  7. On the Confirm installation selections page, click Install and then click Close.

figure 3

Figure 3. Selecting the BitLocker Drive Encryption Administration Utilities.

Create the BitLocker Group Policy

Following these steps, you enable the backup of BitLocker and TPM recovery information to Active Directory. You also enable the policy for the TPM validation profile.

  1. On DC01, using Group Policy Management, right-click the Contoso organizational unit (OU), and select Create a GPO in this domain, and Link it here.
  2. Assign the name BitLocker Policy to the new Group Policy.
  3. Expand the Contoso OU, right-click the BitLocker Policy, and select Edit. Configure the following policy settings:

    Computer Configuration / Policies / Administrative Templates / Windows Components / BitLocker Drive Encryption / Operating System Drives

    1. Enable the Choose how BitLocker-protected operating system drives can be recovered policy, and configure the following settings:
      1. Allow data recovery agent (default)
      2. Save BitLocker recovery information to Active Directory Domain Services (default)
      3. Do not enable BitLocker until recovery information is stored in AD DS for operating system drives (Do Not Enable This Winking smile)
    2. Enable the Configure TPM platform validation profile for BIOS-based firmware configurations policy.
    3. Enable the Configure TPM platform validation profile for native UEFI firmware configurations policy.

      Computer Configuration / Policies / Administrative Templates / System / Trusted Platform Module Services

    4. Enable the Turn on TPM backup to Active Directory Domain Services policy.

(Don’t forget to disable Secure Boot & Enable the secure boot again after deployment is succes vol!!)

Set permissions in Active Directory for BitLocker

In addition to the Group Policy created previously, you need to configure permissions in Active Directory to be able to store the TPM recovery information. In these steps, we assume you have downloaded the Add-TPMSelfWriteACE.vbs script from Microsoft to C:\Setup\Scripts on DC01.

  1. On DC01, start an elevated PowerShell prompt (run as Administrator).
  2. Configure the permissions by running the following command:
    cscript C:\Setup\Scripts\Add-TPMSelfWriteACE.vbs
    

figure 4

Figure 4. Running the Add-TPMSelfWriteACE.vbs script on DC01.

Add BIOS configuration tools from Dell, HP, and Lenovo

If you want to automate enabling the TPM chip as part of the deployment process, you need to download the vendor tools and add them to your task sequences, either directly or in a script wrapper.

Add tools from Dell

The Dell tools are available via the Dell Client Configuration Toolkit (CCTK). The executable file from Dell is named cctk.exe. Here is a sample command to enable TPM and set a BIOS password using the cctk.exe tool:

cctk.exe --tpm=on --valsetuppwd=Password1234
Add tools from HP

The HP tools are part of HP System Software Manager. The executable file from HP is named BiosConfigUtility.exe. This utility uses a configuration file for the BIOS settings. Here is a sample command to enable TPM and set a BIOS password using the BiosConfigUtility.exe tool:

BIOSConfigUtility.EXE /SetConfig:TPMEnable.REPSET /NewAdminPassword:Password1234

And the sample content of the TPMEnable.REPSET file:

English
Activate Embedded Security On Next Boot
*Enable
Embedded Security Activation Policy
*No prompts
F1 to Boot
Allow user to reject
Embedded Security Device Availability
*Available
Add tools from Lenovo

The Lenovo tools are a set of VBScripts available as part of the Lenovo BIOS Setup using Windows Management Instrumentation Deployment Guide. Lenovo also provides a separate download of the scripts. Here is a sample command to enable TPM using the Lenovo tools:

cscript.exe SetConfig.vbs SecurityChip Active

CustomSettings.ini

[Default]
SkipBitLocker=YES

[LAPTOP]
TaskSequenceID=LAPTOP
MachineObjectOU=OU=Bitlocker,OU=LAPTOPS,OU=Clients,DC=wardvissers,DC=local
BDEKeyLocation=\\mdt01.wardvissers.local\Bitlocker$

Source

New Training Platform: Learn @ KEMP

Ward Vissers Blogging About Microsoft Exchange VMware and other interresting things about ICT

Your gateway to becoming proficient in all things KEMP is here! We have recently launched our Learn @ KEMP Training Portal, making it easy for you to:

• Learn about KEMP’s Series of Load Balancers.
• Get certified at all levels ranging from Sales to Advanced Technical Training.
• Explore our wealth of resources, from our “Expert Series” webinars to detailed configuration templates.
• Engage with Support & Sales through chat, community forums, blogs, social media or just regular email.

Start your learning journey today! Register for Learn @ KEMP

Once you achieve certification at any level, you will see your Badge Status update in real time, and have access to your certificate in the “My Account” section. Moreover, you can share the news of you becoming KEMP certified on LinkedIn, Facebook, Twitter etc.

Learn at KEMP Training

If you are supporting, designing, implementing, configuring or managing a KEMP LoadMaster load balancer, consider making the KEMP Certified Engineer (KCE) your immediate certification goal.

However, if you are in sales and need to know just the basics you should aim to complete our Essentials training course and achieve your KEMP Certified Salesperson badge and certificate.

For the best learning experience, the Learn at KEMP training is structured so that you complete each course level and achieve your certifications, starting off with Essentials, before you move on to the next level.

Could you be one of the select few to achieve the GOLD standard of KEMP Certified Master?