New release RVTools, version 3.6

Rob de Veij released today TVTools version 3.6, the release notes:

  • New tabpage with cluster information
  • New tabpage with multipath information
  • On vInfo tabpage new fields HA Isolation response and HA restart priority
  • On vInfo tabpage new fields Cluster affinity rule information
  • On vInfo tabpage new fields connection state and suspend time
  • On vInfo tabpage new field The vSphere HA protection state for a virtual machine (DAS Protection)
  • On vInfo tabpage new field quest state.
  • On vCPU tabpage new fields Hot Add and Hot Remove information
  • On vCPU tabpage cpu/socket/cores information adapted
  • On vHost tabpage new fields VMotion support and storage VMotion support
  • On vMemory tabpage new field Hot Add
  • On vNetwork tabpage new field VM folder.
  • On vSC_VMK tabpage new field MTU
  • RVToolsSendMail: you can now also set the mail subject
  • Fixed a datastore bug for ESX version 3.5
  • Fixed a vmFolder bug when started from the commandline
  • Improved documentation for the commandline options

Latest Version: 3.6 | February, 2014
Download | Documentation

Free e-learning course – Virtualizing Microsoft Exchange 2013 on VMware vSphere 5 Fundamentals

This self paced free eLearning course illustrates why organizations need to consider virtualizing Exchange 2013 on VMware vSphere. This course focuses on Exchange design prerequisites and considerations, when virtualizing Exchange 2013.
It also describes design, sizing, and implementation guidelines and best practices, that should be followed as part of a structured design and implementation methodology.

The course consists of three modules:

  • Introduction to Virtualizing Microsoft Exchange 2013 provides an overview of the challenges that organizations typically face when deploying Microsoft Exchange 2013 on physical hardware, and how these challenges can be addressed by virtualizing Exchange on VMware vSphere. This module also describes the benefits that organizations can realize by virtualizing Exchange 2013 on the vSphere platform.
  • Designing the Virtualized Exchange Environment evaluates the prerequisites for designing an Exchange 2013 solution when deployed in a virtualized environment. This module also covers the design considerations and guidelines for designing and sizing Exchange 2013 on vSphere.
  • Implementing the Virtualized Exchange Solution covers various implementation options that should be considered when virtualizing Exchange 2013 on the vSphere platform. This module also discusses several implementation considerations that should be factored into an Exchange 2013 design. Finally, this module discusses how to monitor and test the performance of Exchange 2013 on VMware vSphere.

Virtualizing Microsoft Exchange 2013 on VMware vSphere [V5.X] Fundamentals

Thnx to Eric Sloof

VM Advanced ISO. Free Tools For Advanced Tasks

Kendrick Coleman has compiled a CD with FREE TOOLS for virtual machines within your VMware environment. All of the tools in this package were pooled together for performing advanced tasks to optimize performance, reclaim lost space, and clean up your virtual machine.

CURRENT VERSION = 0.8

Without further ado here is what is packaged in VM Advanced v0.8 (510MB):

  • FoxitPortablePDF
  • 01 – P2V Clean-up
    • 01 – Resolution Resize
    • 02 – HP ProLiant Cleaner
    • 03 – Remove Non Present Devices
      04 – Rename Local Area Connection
    • 05 – Network Settings
    • 06 – Dell Cleanup
  • 02 – Hal Upgrade-Downgrade
    • 01 – HAL_Toggle <- UPDATED
  • 03 – Partition Alignment
    • 02 – mbrtools (only how-to is provided) <-REMOVED, Use UBERAlign
    • 04 – Paragon Alignment Tool 2.0 (free tool for limited time but cannot distribute within ISO) <-REMOVED, Use UBERAlign
  • 03 – VDI Performance
    • 01 – VM Check Partition Alignment
    • 02 – Aligning VMDK Partition For Template
    • 03 – Quest Desktop Optimizer
  • 04 – Reclaim Space
    • 01 – SDelete
  • 05 – Analysis
    • 01 – IOPS w/ IOmeter
    • 02 – LoadStorm
    • 03 – NetworkPerformance
      • 01-  iperf
      • 02 – PSTools <- New
  • 06 – SysprepFiles
    • 01 – vCenterSysprep
    • 02 – vCloudSysprep
  • 07 – Virtual Router
    • FreeSCO
  • 08 – Floppies
    • 01 – LSI_Logic_Parallel_WinXP_x86
    • 02 – Bus_LogicParallel_WinXP_x86

  • 09 – vSphere Client
  • 10 – Security
    • 01 – Angry IP Scanner
    • 02 – Blues Port Scanner
    • 03 – NetworkActiv PortScanner
    • 04 – PuTTY
    • 05 – HijackThis
  • 11 – SQL Native Client
    • 01 – SQL Native Client
  • 12 – ISO Creation <- New
    • 01 -Folder2Iso

Download Here:
VM Advanced v0.8 ISO

Windows Assessment and Deployment Kit (ADK) and vSphere 4 does not work together

When you using vSphere 4 and and using MDT 2012 update1 with Windows Assessment and Deployment Kit you run in de following error. Same thing wil also with Workstation 8.clip_image001

Solution 1: Do not install Windows Assessment and Deployment Kit on your MDT Server. You can still using MDT 2012 Update 1 with waik 3.5 if not deploying Windows 8 or Windows 2012 right now.

Solution 2: Upgrading you vSphere server to the latest version (5.1) or Upgrade Workstation to latest version (Version 9).

Microsoft Virtual Machine Converter Solution Accelerator

The Microsoft Virtual Machine Converter (MVMC) Solution Accelerator is a Microsoft-supported, stand-alone solution for the IT pro or solution provider who wants to convert VMware-based virtual machines and disks to Hyper-V®-based virtual machines and disks.

MVMC provides the following features:

  • Converts and deploys virtual machines from VMware hosts to Hyper-V hosts including Hyper-V on Windows Server® 2012. As part of the machine conversion MVMC converts the virtual disks attached to the source virtual machine. It also migrates configuration such as memory, virtual processor and so on from the source virtual machine to the converted virtual machine deployed on Hyper-V. It adds virtual network interface cards (NICs) to the converted virtual machine on Hyper-V.
  • Converts VMware virtual disks to Hyper-V based virtual hard disks (VHDs).
  • Supports conversion of virtual machines from VMware vSphere 4.1 and 5.0 hosts to Hyper-V.
    • Note MVMC also supports conversion of virtual machines from VMware vSphere 4.0 if the host is managed by vCenter 4.1 or vCenter 5.0. You have to connect to vCenter 4.1 or 5.0 through MVMC to convert virtual machines on vSphere 4.0.
  • Offers fully scriptable command-line interfaces for performing virtual machine and disk conversions that integrates well with data center automation workflows and Windows PowerShell scripts.
  • Has a wizard-driven GUI, making it simple to perform virtual machine conversion.
  • Uninstalls VMware tools prior to conversion to provide a clean way to migrate VMware-based virtual machines to Hyper-V.
  • Supports Windows Server guest operating system conversion, including Windows Server 2008 R2, Windows Server 2008 and Windows Server 2003 SP2.
  • Enables conversion of Windows® client versions including Windows 7.
  • Installs integration services on the converted virtual machine if the guest operating system is Windows Server 2003 SP2.

System requirements

Supported operating systems: Windows 7, Windows Server 2008 R2, Windows Server 2012

Before you install MVMC, you must install the following software on the computer on which MVMC will run:

  • Operating systems: Windows 7, Windows Server 2008 R2, or Windows Server 2012 (full installation)
  • Microsoft .NET Framework 3.5 and Microsoft .NET Framework 4 if installing MVMC on Windows 7 or Windows Server 2008 R2
  • Microsoft .NET Framework 4.5 if installing MVMC on Windows Server 2012

Download

VMware Workstation 9

Windows 8

Workstation 9 has been designed to run on Windows 8 and run Windows 8 virtual machines. Easy Install has been enhanced to recognize Windows 8. Workstation 9 has been enhanced to support the Windows 8 user interface (formerly known as Metro). Toggling between Metro and the Windows Desktop can be done by simply pressing the Windows key on the keyboard and Unity intelligently handles the Metro interface. Workstation 9 also includes multi-touch support for driving the Windows 8 Metro interface running in Workstation on a Windows 8 tablet.

Graphics Improvements

VMware has made substantial changes to Workstation 9 graphics virtualization infrastructure. The enhancements include a display-only graphics driver that can render 3D in Windows 8 without hardware acceleration, improvements to make graphics applications like AutoCAD and SolidWorks render more quickly and accurately, an improved Windows XP graphics driver and fundamental changes to improve performance and enable more advanced graphics capabilities in the future.

OpenGL for Linux Guests

VMware has developed an OpenGL graphics driver and up-streamed it to X.Org. This allows VMware’s customers to use the new graphics capabilities in current Linux distributions without needing to install VMware Tools. The version of X.Org that includes the driver is being shipped in Ubuntu 12.04 among other Linux new distributions. Workstation 9 includes enhancements to the virtual graphics device to improve the overall speed and accuracy of rendering OpenGL graphics in Linux virtual machines.

Restricted Virtual Machines

This new capability allows the author of an encrypted virtual machine to require users to enter an additional password to change their virtual machine settings. This feature enables IT professionals and educational institutions to create virtual machines to be used by their employees and students that prevent these users from enabling shared folders, dragging and dropping files, attaching USB devices, and overcommitting system resources. Restricted virtual machines can be run in VMware Workstation 9, VMware Player 5, and VMware Fusion 5 on Windows, Linux or Mac PCs.

WSX

WSX is a prototype of a new VMware Workstation web interface that enables users to access their Shared virtual machines via a web browser on a tablet, smart phone or PC without installing any additional applications or browser plug-ins. This service renders an HTML5 web page that can connect to your Workstation hosts, enumerate the available Shared virtual machines and allow you to power them on and interact with the desktop. Both the Windows .msi and Linux .bundle installations are available for download along with VMware Workstation 9.0

WSX is currently not supported for production environments. The number of devices and browsers available on the market make it extremely difficult to test this feature thoroughly to ensure it works well everywhere.

This feature requires a very modern browser that supports HTML5 with WebSockets. VMware recommends using the Google Chrome 17 browser on PCs and the Apple Safari 5 browser on Mac OS hosts and iPads. Currently there are issues using this feature with Microsoft Internet Explorer 10. WSX may work with other browsers and on Android tablets running Ice Cream Sandwich with the latest version of Google Chrome installed, but more testing is required.

Downloading Virtual Machines from vSphere

Workstation 8 enabled customers to upload virtual machines to vSphere. Workstation 9 now enables downloading virtual machines from vSphere by dragging them from the remote host to the My Computer section of the Virtual Machine Library.

USB 3.0

Workstation 9 supports attaching USB 3.0 devices to Windows 8 virtual machines. The latest portable devices use USB 3 (SuperSpeed) to achieve faster transfer rates for data. USB 3.0 devices such as portable storage devices and video equipment can be connected directly to Windows 8 and Linux virtual machines that contain in-box drivers USB 3.0 controllers.

Nested Virtualization

Workstation 9 improves the implementation of virtual Intel VT-x/EPT or AMD-V/RVI extensions. This allows users to run ESX as a guest OS and run a 64-bit operating system nested in ESX using less system resources.

Note: If you enabled the virtualization extensions in a virtual machine running on Workstation 8, you might need to disable the extensions, upgrade the virtual machine to the latest virtual hardware version (compatible with Workstation 9), and then re-enable the extensions.

Hyper-V

Hyper-V has been added to the Workstation 9 guest operating system list. This enables customers to run Windows 8 with Hyper-V enabled, or install Hyper-V Server. This can be used for educational purposes or for building prototype Hybrid Clouds. This feature is NOT SUPPORTED and probably never will be. Microsoft does not support nesting of their hypervisor which makes it extremely difficult – if not impossible for VMware to fix issues that may occur in this configuration. For this reason, this capability has been implemented purely to see if we could do it!

CAUTION: DO NOT ATTEMPT TO RUN HYPER-V ON A VIRTUAL MACHINE IN PRODUCTION.

Virtual Performance Counters

VMware virtual processors now include the capability to enable virtual performance counters which will allow developers to run profiling applications, such as Intel’s vTune, in a virtual machine.

Remoting Improvements

The experience when remotely connecting to a virtual machine running in Workstation 9 with a VNC client or interacting with the desktop of a virtual machine running on vSphere from within Workstation has been significantly improved.

Disk Cleanup

Virtual machines consume a large amount of space on your hard drive. Workstation 9 includes a new management option to easily recover disk space.

Quick Switch II

Previous versions of VMware Workstation included a view mode called "Quick Switch" that displayed tabs along the top of the screen to easily switch between running virtual machines. We removed this functionality in Workstation 8. The feedback we received has encouraged us to introduce a similar feature. On Windows, hosts tabs have been included in the full screen toolbar.

Thumbnail Actions

Views of your virtual machine on the task bar now include controls to change the power state.

Saved Filters

Workstation 9 automatically saves recent virtual machine library searches as filters to easily apply them the next time you run Workstation.

Download Licensed Copy

VMware PowerCLI Configure Multipath Policy

Today i  needed to configure the Multipath Policy from “Most Recently Used” to “Round Robin (VMware) on our vSphere 4.1 and HP EVA4400 environment. After reading “Configuration best practices for HP StorageWorks Enterprise Virtual Array (EVA) family and VMware vSphere 4” I decided to change the path status

To check the status of the Multipath Policy you can run the following PowerCLI script:

Per host:

Get-VMhost ESXHOST | Get-ScsiLun -LunType disk
image9

Per Cluster:

Get-Cluster CLUSTERNAME| Get-VMHost | Get-ScsiLun -LunType disk

To change the Multipath Policy you can run the following command:

Per Host:

Get-VMHost ESXHOST | Get-ScsiLun -CanonicalName "naa.6005*" | Set-ScsiLun -MultipathPolicy "roundrobin"

image10

 

Per Cluster:
get-cluster “Cluster Name” | Get-VMHost | Get-ScsiLun -LunType disk | Where-Object {$_.MultipathPolicy -ne “RoundRobin”} | Set-ScsiLun -MultipathPolicy “RoundRobin”

Special thanks to: VMPROS

vSphere 5 Reference Card

Forbes Guthrie created a vSphere 5 Reference Card. The VMware documentation is about 1700 pages, but fortunately these notes are packed down into about 50 pages.
They’re all excerpts take directly from the official VMware PDFs. This makes it great to study from, as the VCP questions are often taken straight from their documentation. I occasionally added a few words to help clarify the context of the sentence, but the vast majority of the content is word-for-word. Being direct quotes makes it easy for you to search within the PDF if you are unsure on an area or need greater clarification surround a statement.

image

To download just click on the picture Knipogende emoticon.

Microsoft Exchange Server 2010 Performance on vSphere 5

A white paper has been published that examines how Microsoft Exchange Server 2010 performs on vSphere 5 in terms of scaling up (adding more virtual CPUs) and scaling out (adding more VMs). Having the choice to scale up or out while maintaining a positive user experience gives IT more flexibility to right-size system deployments and maximize total cost of ownership with respect to licensing and hardware purchases.

Testing shows the effectiveness of vSphere 5 to add compute power by scaling up Exchange Server VMs, in increments, from 2 to 12 virtual CPUs. This allowed the total number of very heavy Exchange users to increase from 2,000 to 12,000 while sendmail latency remained well within the range of acceptable user responsiveness. Processor utilization remained low, at about 15% of the total host processing capacity for 12,000 very heavy Exchange users.

Testing also shows that scaling out to eight Exchange Server VMs supports a workload of up to 16,000 very heavy users, with the load consuming only 32% of the ESXi host processing capacity.

Additional tests were undertaken to show the performance improvements of vMotion and Storage vMotion in vSphere 5. vMotion migration time for a 4-vCPU Exchange mailbox server VM showed a 34% reduction in vSphere 5 over vSphere 4.1. Storage vMotion migration time for a 350GB database VMDK showed an 11% reduction in vSphere 5 over vSphere 4.1.

image

For the full paper, see Microsoft Exchange Server 2010 Performance on vSphere 5.

VMware Workstation 8

What’s New

This release of VMware Workstation adds the following new features and support.

Installation Changes and Enhanced Keyboards

The hardware requirements to install this version of Workstation have changed. Workstation now requires a relatively modern 64-bit CPU. See Installation Requirements for details.

The keyboard filter driver is no longer installed by default. When the driver is not installed, the enhanced keyboard functionality is unavailable and you must press Ctrl-Alt-Ins instead of Ctrl-Alt-Del to send a Ctrl-Alt-Del keystroke to the guest. To use the enhanced keyboard functionality, you must perform a custom installation and select the component. If you select the component, you must reboot whenever you install or uninstall Workstation.

Virtual Hardware Improvements

This version of Workstation includes many hardware improvements. To try new hardware features, you must upgrade the hardware version of your virtual machine or create a new virtual machine that uses the latest virtual hardware version.

  • The display technology has been changed to provide a better experience for Unity users and users who have multiple monitors. These changes also allow you to add a projector to your laptop without restarting your virtual machine.
  • Virtual machines can now support up to 64GB of memory. The host system should have more than 64GB of memory to use this feature.
  • An HD Audio device is available for Windows Vista, Windows 7, Windows 2008, and Windows 2008 R2 guests. The HD Audio device is compatible with the RealTek ALC888 7.1 Channel High Definition Audio Codec.
  • USB 3.0 support is available for Linux guests running kernel version 2.6.35 or later (Ubuntu 10.10) through a new virtual xHCI USB controller. To enable this feature, add the following line to the .vmx file: usb_xhci.present = “true”. Do not enable this feature for Windows guests. Because Windows does not currently have a generic xHCI driver, this feature will not work in Windows.
  • Bluetooth devices on the host can now be shared with Windows guests. With the latest hardware version, Bluetooth devices that are paired to the host system radio are available to Windows guests and can be paired from within the guest. You should not pair Bluetooth audio devices, such as headphones, or Bluetooth input devices, such as keyboards and mice, to a guest.
  • You can now enable Virtual VT-X/EPT or AMD-V/RVI in the processor settings interface. With this feature, applications running in a guest can take advantage of these virtualization technologies. You can also run 64-bit guest operating systems inside of vSphere running inside Workstation.
New User Interface

The Workstation user interface has been updated to include new menus, toolbars, and an improved preferences screen.

  • The favorites sidebar has been replaced with a virtual machine library. Instead of identifying every virtual machine created in Workstation as a favorite, the library is a comprehensive list of all of the virtual machines that Workstation users create, open, or access.
  • A new folder summary page helps you to better manage a group of related virtual machines. Live thumbnails make it easy to see what is happening in running virtual machines.
  • The full screen toolbar has been updated so that you can do more without having to leave full screen mode. Quick switch mode is no longer needed.
What Happened to Teams?

Although at first it might appear that the teams feature has been removed, you can add team attributes to any virtual machine in this version of Workstation.

  • The team structure has been converted to a simple folder of virtual machines.
  • A new advanced settings dialog box has been added for network adapters to let you throttle the bandwidth of incoming and outgoing transmissions and simulate packet loss.
  • You can perform power operations on several virtual machines at the same time by selecting virtual machines on the folder tab and pressing the power button on the toolbar. If all of the virtual machines in a folder are in the same power state, you can select the folder to perform a power operation on all of the virtual machines in the folder.
  • You use a global Workstation preference to configure the delay between powering on virtual machines.
  • To implement LAN segments, you can use traditional VMnets or put all of the virtual machines that you want to communicate on the same custom VMnet.
Shared Virtual Machines and AutoStart

You can share virtual machines with remote users in this version of Workstation. A shared virtual machine can be accessed remotely by other instances of Workstation. Workstation moves virtual machines to the shared virtual machines folder, where the VMware Host Agent service manages them. The VMware Host Agent service is used by other VMware products, including VMware Server and vSphere, and provides additional capabilities required by professional users. An extensive permissions interface lets you control the users who can access and use shared virtual machines.

You can use the new AutoStart feature to configure shared virtual machines to start with the host system. You can also configure AutoStart for shared virtual machines on remote hosts running Workstation and ESX 4.x and later.

Remote Connections

In this version of Workstation, you are no longer constrained to working only with virtual machines that your computer has enough power to run. You can use the new Connect to Server feature to connect to remote hosts running Workstation, ESX 4.x and later, and VMware vCenter Server. After connecting to a remote host, all of the virtual machines that you have permission to access are displayed in the virtual machine library.

Upload to ESX/ESXi and vCenter Server

VMware OVF Tool is now integrated with Workstation so that you can upload a virtual machine from Workstation to a remote server running ESX, ESXi, or vCenter Server. After connecting to a remote server, you drag the virtual machine from the local My Computer section of the virtual machine library to the remote server. A wizard walks you through the process.

Documentation Changes

This version of Workstation includes several important documentation changes.

(NEW) Getting Started with VMware Workstation
Describes how to install and upgrade Workstation, create a typical virtual machine, and perform common virtual machine operations.

Using VMware Workstation
(previously VMware Workstation User’s Guide)
Describes how to create typical, custom, and shared virtual machines, add virtual devices, configure network connections, connect to remote servers and use remote virtual machines, upload virtual machines to remote servers, and perform all virtual machine operations.

Getting Started with VMware Player
(previously VMware Player Getting Started Guide)
Now contains complete information on installing and using Player.

Online help
Has been redesigned to provide context-sensitive help and information on performing common tasks. For complete information on using Workstation and Player, see the guides.

(NEW) Installing and Configuring VMware Tools
Contains comprehensive information on installing, upgrading, and configuring VMware Tools.

Top of Page

Installation Requirements

When you install Workstation, the installer performs checks to make sure the host system has a processor that meets the following requirements. You cannot install Workstation if the host system does not meet these requirements.

  • 64-bit x86 CPU
  • LAHF/SAHF support in long mode

You can use CPU-Z or a similar utility to determine if the host system CPU is 64-bit capable. CPU-Z shows EM64T (Intel) or AMD64 (AMD) if the processor is 64-bit capable.

If you plan to install a 64-bit guest operating system in a virtual machine, the host system must have one of the following processors. Workstation will not allow you to install a 64-bit guest operating system if the host system does not have one of these processors.

  • AMD CPU that has segment-limit support in long mode.
  • Intel CPU that has VT-x support. VT-x support must be enabled in the host system BIOS. The BIOS settings that must be enabled for VT-x support vary depending on the system vendor. See VMware KB article 1003944 for information on how to determine if VT-x support is enabled.

Top of Page

Known Issues

The known issues are grouped as follows:

Remote Connection and Remote Virtual Machine Issues
  • When Workstation is installed on a Linux host, VMware Workstation Server writes the core file to /usr/bin instead of to /var/core or /var/log/vmware.
  • You cannot use Workstation to create a remote virtual machine on an ESX or ESXi 4.1 host if the virtual machine name contains non-ASCII characters.
  • When you upload a virtual machine to a remote server (VM > Manage > Upload), Workstation modifies the MAC address and PCI slot number of the virtual Ethernet device in the newly created remote virtual machine. Network errors can occur in the remote virtual machine if the network settings in the guest operating system require the original network hardware configuration.
    Workaround: Change the network settings in the guest operating system in the remote virtual machine to match the new network hardware configuration.
  • VMware Workstation Server occasionally crashes on a 32-bit Red Hat Enterprise Linux 6.x host.
Role and Permission Issues
  • On a Windows host, if you edit a permission, assign the Administrator role, and then immediately click Remove to delete the permission, the original permission still exists when you reopen the Permissions dialog box.
Shared Virtual Machine Issues
  • On Windows hosts, if a shared virtual machine has a floppy drive that is configured to connect at power on, and a remote user powers on the virtual machine, a dialog box appears on the host system asking whether to connect the device every time the virtual machine powers on. If you click Yes to close the dialog box on the host system after the virtual machine is completely up and running on the host system, Workstation crashes on the host system.
  • On a 32 or 64-bit Windows 7, 64-bit Windows 2008 R2, or 32-bit Windows XP Professional SP3 host, if you uninstall Workstation, preserve the configuration, and then reinstall Workstation to a different path, the Shared VMs item is unavailable in the virtual machine library.
  • On a Windows host, if you create a virtual machine with a name that contains non-ASCII characters in the New Virtual Machine wizard, you cannot share the virtual machine with the Move the virtual machine option if the destination path is other than the system operating system location. The sharing process stops with the error message Failed to move VM to destination path.
    Workaround: If you want to share the virtual machine, you must use only ASCII characters in the virtual machine name when you create the virtual machine in the New Virtual Machine wizard.
Display and Input Issues
  • On an Ubuntu 11.04 host, the virtual machine icon does not appear on the system tray when you set the Show tray icon setting (Edit > Preferences > Workspace) to Always or When a virtual machine is powered on.
    Workaround: Whitelist vmware-tray as an application that can show system tray icons in Ubuntu 11.04. Alternatively, enable Notification Area (Systray) for all applications, for example:
    gsettings set com.canonical.Unity.Panel systray-whitelist "['all']"
    After you run the command, log out and log back in. The command can take several minutes to take effect.
  • On a Fedora 15 host, powering on a virtual machine that has DirectX 9 accelerated graphics enabled might fail with the error "Unable to change virtual machine power state: Cannot find a valid peer process to connect to."
    Workaround: Deselect the Accelerate 3D graphics setting (VM > Settings > Hardware > Display) to disable DirectX 9 accelerated graphics in the virtual machine.
  • When you enter Unity mode in an Ubuntu 11.04 guest, application menus do not appear for applications that were opened before entering Unity mode. Application menus do appear for applications that are opened from the Unity launch menu after entering Unity mode.
    Workaround: Disable the APPMENU (Global menu) in the Ubuntu 11.04 guest. See the Ubuntu documentation for more information.
  • After you upload a Windows XP virtual machine from the local host to a remote server, you cannot autofit the guest in full screen mode. This problem occurs because VRAM is reduced to 4 MB when the virtual machine is uploaded to the remote server.
Folder and Team Conversion Issues
  • When you select a newly created folder in the Workstation library, the toolbar power option button is dimmed and you cannot perform batch power operations on the virtual machines in the folder.
    Workaround: If you select a virtual machine in the folder, move the selection off the virtual machine (for example, click anywhere on the folder tab), and then select the folder in the library again, the toolbar power option button becomes available.
Device Issues
  • On Windows hosts, Player crashes if you click Connect or Disconnect in the Removable Devices menu before the console appears.
  • An Ubuntu 11.04 host might crash when you try to connect a USB device to a running virtual machine from the status bar icon’s context menu. This problem typically occurs after Workstation is freshly installed, the host is rebooted, and the first time the device is connected to the virtual machine.
Physical Machine Virtualization Issues
  • When simple file sharing or UAC is enabled on the physical machine, the Virtualize a Physical Machine wizard returns an "incorrect user credentials" error instead of an error message that indicates simple file sharing or UAC must be disabled before virtualizing the physical machine. See the online help or Using VMware Workstation for information on preparing a physical machine for virtualization.
  • You cannot use the Virtualize a Physical Machine wizard if the Workstation installation path contains non-ASCII characters.