Tag: Running

Exchange 2016 Cumulative Update 9 and Exchange 2013 Cumulative Update 20

On March 20, 2018 Microsoft has released two new quarterly updates:

  • Exchange 2016 Cumulative Update 9 (CU9)
  • Exchange 2013 Cumulative Update 20 (CU20)
TLS 1.2

There aren’t too many new features in these CUs. The most important ‘feature’ is that TLS 1.2 is now fully supported (most likely you already have TLS 1.2 only on your load balancer). This is extremely supported since Microsoft will support TLS 1.2 ONLY in Office 365 in the last quarter of this year (see the An Update on Office 365 Requiring TLS 1.2 Microsoft blog as well).

Dot.net Support

Support for .NET Framework 4.7.1, or the ongoing story about the .NET Framework. The .NET Framework 4.7.1 is fully supported by Exchange 2016 CU9 and Exchange 2013 CU20. Why is this important? For the upcoming CUs in three months (somewhere in June 2018) the .NET Framework 4.7.1 is mandatory, so you need these to be installed in order to install these upcoming CUs.

Please note that .NET Framework 4.7 is NOT supported!

If you are currently running an older CU of Exchange, for example Exchange 2013 CU12, you have to make an intermediate upgrade to Exchange 2013 CU15. Then upgrade to .NET Framework 4.6.2 and then upgrade to Exchange 2013 CU20. If you are running Exchange 2016 CU3 or CU4, you can upgrade to .NET Framework 4.6.2 and then upgrade to Exchange 2016 CU9.

Schema changes

If you are coming from a recent Exchange 2013 CU, there are no schema changes since the schema version (rangeUpper = 15312) hasn’t changed since Exchange 2013 CU7. However, since there can be changes in (for example) RBAC, it’s always a good practice to run the Setup.exe /PrepareAD command. For Exchange 2016, the schema version (rangeUpper = 15332) hasn’t changed since Exchange 2016 CU7.

As always, check the new CUs in your lab environment before installing into your production environment!!

Exchange 2016 CU9 Information and download Links
Exchange 2013 CU20 Information and download Links

Exchange Server 2013 enters the Extended Support phase of product lifecycle on April 10th, 2018. During Extended Support, products receive only updates defined as Critical consistent with the Security Update Guide. For Exchange Server 2013, critical updates will include any required product updates due to time zone definition changes.

Imported Hotfixes for Windows 2008 R2 Clustering

Imported Hotfixes for Windows 2008 R2 Clustering:

NTFS.sys

2814923          “0x0000009E” Stop error and disk volumes cannot be brought online on a Windows Server 2008 R2-based failover cluster
http://support.microsoft.com/kb/2814923/EN-US

MPIO

2754704          A hotfix is available that provides a mechanism for DSM to notify MPIO that a particular path is back to online in Windows Server 2008 and Windows Server 2008 R2
http://support.microsoft.com/kb/2754704/EN-US

storport.sys

2780444          “0x0000012E” Stop error occurs when an application sends a 12-byte SCSI opcode to an iSCSI target in Windows Vista SP2, Windows Server 2008 SP2, Windows 7 SP1, and Windows Server 2008 R2 SP1
http://support.microsoft.com/kb/2780444/EN-US

msiscsi

2684681          Iscsicpl.exe process stops responding when you try to reconnect a storage device to a computer that is running Windows Vista, Windows Server 2008, Windows 7, or Windows Server 2008 R2
http://support.microsoft.com/kb/2684681/EN-US

rdbss

2670567 “0x000000027” Stop error when you copy a file from a redirected folder in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2670567/EN-US

Kernel

2805853          “0x0000008E” Stop error on a computer that is running Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2805853/EN-US

RPCSS

2756999 Handle leak occurs on a COM client that is running on a Windows 7 or Windows Server 2008 R2 computer
http://support.microsoft.com/kb/2756999/EN-US

Mrxsmb10

2727324 Computer stops responding after you connect to an SMB 1 server in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2727324/EN-US

Mrxsmb20

2778834          File becomes corrupted when you try to overwrite the file while it is opened by another user on a computer that is running Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2778834/EN-US

TCPIP

2519644          Stop code in the tcpip.sys driver on a computer that is running Windows Server 2008 R2: 0x000000D1
http://support.microsoft.com/kb/2519644/EN-US

2524478          The network location profile changes from “Domain” to “Public” in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2524478/EN-US

If you can‘t send an email with iOS 11 and an Outlook.com or Exchange mail account

You might not be able to send email with an Outlook.com, Office 365, or Exchange account until you update to iOS 11.0.1.

If your email account is hosted by Microsoft on Outlook.com or Office 365, or an Exchange Server 2016 running on Windows Server 2016, you might see this error message when you try to send an email with iOS 11: “Cannot Send Mail. The message was rejected by the server.”

To fix the issue, update to iOS 11.0.1 or later.

Exchange Server 2016 Cumulative Update 7 (KB4018115) and Exchange Server 2013 Cumulative Update 18 (KB4022631)

The latest set of Cumulative Updates for Exchange Server 2016 and Exchange Server 2013 are now available on the download center.  These releases include fixes to customer reported issues, all previously reported security/quality issues and updated functionality.

Minimum supported Forest Functional Level is now 2008R2

In our blog post, Active Directory Forest Functional Levels for Exchange Server 2016, we informed customers that Exchange Server 2016 would enforce a minimum 2008R2 Forest Functional Level requirement for Active Directory.  Cumulative Update 7 for Exchange Server 2016 will now enforce this requirement.  This change will require all domain controllers in a forest where Exchange is installed to be running Windows Server 2008R2 or higher.  Active Directory support for Exchange Server 2013 remains unchanged at this time.

Support for latest .NET Framework

The .NET team is preparing to release a new update to the framework, .NET Framework 4.7.1.  The Exchange Team will include support for .NET Framework 4.7.1 in our December Quarterly updates for Exchange Server 2013 and 2016, at which point it will be optional.  .NET Framework 4.7.1 will be required on Exchange Server 2013 and 2016 installations starting with our June 2018 quarterly releases.  Customers should plan to upgrade to .NET Framework 4.7.1 between the December 2017 and June 2018 quarterly releases.

The Exchange team has decided to skip supporting .NET 4.7.0 with Exchange Server.  We have done this not because of problems with the 4.7.0 version of the Framework, rather as an optimization to encourage adoption of the latest version.

Known unresolved issues in these releases

The following known issues exist in these releases and will be resolved in a future update:

  • Online Archive Folders created in O365 will not appear in the Outlook on the Web UI
  • Information protected e-Mails may show hyperlinks which are not fully translated to a supported, local language

Release Details

KB articles that describe the fixes in each release are available as follows:

Exchange Server 2016 Cumulative Update 7 does not include new updates to Active Directory Schema.  If upgrading from an older Exchange version or installing a new server, Active Directory updates may still be required.  These updates will apply automatically during setup if the logged on user has the required permissions.  If the Exchange Administrator lacks permissions to update Active Directory Schema, a Schema Admin must execute SETUP /PrepareSchema prior to the first Exchange Server installation or upgrade.  The Exchange Administrator should execute SETUP /PrepareAD to ensure RBAC roles are current.

Exchange Server 2013 Cumulative Update 18 does not include updates to Active Directory, but may add additional RBAC definitions to your existing configuration. PrepareAD should be executed prior to upgrading any servers to Cumulative Update 18. PrepareAD will run automatically during the first server upgrade if Exchange Setup detects this is required and the logged on user has sufficient permission.

Additional Information

Microsoft recommends all customers test the deployment of any update in their lab environment to determine the proper installation process for your production environment. For information on extending the schema and configuring Active Directory, please review the appropriate TechNet documentation.

Also, to prevent installation issues you should ensure that the Windows PowerShell Script Execution Policy is set to “Unrestricted” on the server being upgraded or installed. To verify the policy settings, run the Get-ExecutionPolicy cmdlet from PowerShell on the machine being upgraded. If the policies are NOT set to Unrestricted you should use the resolution steps in KB981474 to adjust the settings.

Reminder: Customers in hybrid deployments where Exchange is deployed on-premises and in the cloud, or who are using Exchange Online Archiving (EOA) with their on-premises Exchange deployment are required to deploy the most current (e.g., 2013 CU18, 2016 CU7) or the prior (e.g., 2013 CU17, 2016 CU6) Cumulative Update release.

For the latest information on Exchange Server and product announcements please see What’s New in Exchange Server 2016 and Exchange Server 2016 Release Notes.  You can also find updated information on Exchange Server 2013 in What’s New in Exchange Server 2013, Release Notes and product documentation available on TechNet.

Note: Documentation may not be fully available at the time this post is published.

EXCHANGE 2013 CU17 AND EXCHANGE 2016 CU6

On June 27, 2017 Microsoft has released its quarterly updates for Exchange 2013 and Exchange 2016. The current version is now at Exchange 2013 CU17 (15.0.1320.4) and Exchange 2016 CU6(15.1.1034.26) . But this time there are some interesting things I’d like to point out.

A couple of days before the release of Exchange 2016 CU6 (15.1.1034.26)
Microsoft blogged about Sent Items Behavior Control and Original Folder Item Recovery. With the Sent Items Behavior Control, a message that’s sent using the Send As or Send on behalf of permission is not only stored in the mailbox of the user that actually sent the message, but a copy is also stored in the delegator mailbox sent items. This was already possible for shared mailboxes, but now it’s also possible for regular mailboxes (like manager/assistant scenarios).

The Original Folder Item Recovery feature is I guess on of the most requested features. In the past (before Exchange 2010) when items were restored after they were deleted, they were restored to their original location. With the Dumpster 2.0 that was introduced with Exchange 2010 this was no longer possible, and items were restored to the deleted items folder. In this case the items had to be moved manually to their original location. With the introduction of the Original Folder Item Recovery the restore of deleted items again takes place in the original folder.

Unfortunately, both Sent Items Behavior Control and Original Folder Item Recovery are only available in Exchange 2016 CU6 (and NOT in Exchange 2013 CU17).

When it comes to security TLS 1.2 is a hot topic. Microsoft is aware of this and working hard towards an Exchange environment that only uses TLS 1.2 (so that TLS 1.1 and TLS 1.0 can be disabled). We are not yet at that stage. Exchange 2016 CU6 does have improved support for TLS 1.2, but Microsoft is not encouraging customers to move to a TLS 1.2 environment only.

.NET Framework and Exchange server continues to be a difficult scenario. This is understandable, Exchange is just a consumer of Windows and .NET so the Exchange Product Group does not have much influence on the .NET (and Windows) Product Group.

Exchange 2016 CU6 does NOT support.NET Framework 4.7 at this moment, and you should NOT install .NET Framework on a server running Exchange 2016. Not before and not after the installation of Exchange 2016 CU6. This is also true for Exchange Server 2013 CU17. More information regarding .NET Framework and Exchange server can be found here: https://blogs.technet.microsoft.com/exchange/2017/06/13/net-framework-4-7-and-exchange-server/.

The .NET Framework 4.6.2 is supported by Exchange 2016 CU3 and higher and Exchange 2013 CU15 and higher. For a complete overview of which scenarios are supported, navigate to the Exchange Server Supportability Matrix on https://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx.

KB articles that describe the fixes, features and information in each release are available as follows:

Version

Build

KB Article

Download

UMLP

Schema Changes

Exchange 2016 CU6

15.1.1034.26

KB4012108

Download

UMLP

Yes

Exchange 2013 CU17

15.0.1320.4

KB4012114

Download

UMLP

No

Source: jaapwesselius

Exchange Edge role on Windows Server 2016 is not Recommend

Exchange Team announcing an update to our support policy for Windows Server 2016 and Exchange Server 2016. At this time we do not recommend customers install the Exchange Edge role on Windows Server 2016. We also do not recommend customers enable antispam agents on the Exchange Mailbox role on Windows Server 2016 as outlined in Enable antispam functionality on Mailbox servers.

Why are we making this change?

In our post Deprecating support for SmartScreen in Outlook and Exchange, Microsoft announced we will no longer publish content filter updates for Exchange Server. We believe that Exchange customers will receive a better experience using Exchange Online Protection (EOP) for content filtering. We are also making this recommendation due to a conflict with the SmartScreen Filters shipped for Windows, Microsoft Edge and Internet Explorer browsers. Customers running Exchange Server 2016 on Windows Server 2016 without KB4013429 installed will encounter an Exchange uninstall failure when decommissioning a server. The failure is caused by a collision between the content filters shipped by Exchange and Windows which have conflicting configuration information in the Windows registry. This collision also impacts customers who install KB4013429 on a functional Exchange Server. After the KB is applied, the Exchange Transport Service will crash on startup if the content filter agent is enabled on the Exchange Server. The Edge role enables the filter by default and does not have a supported method to permanently remove the content filter agent. The new behavior introduced by KB4013429, combined with our product direction to discontinue filter updates, is causing us to deprecate this functionality in Exchange Server 2016 more quickly if Windows Server 2016 is in use.

What about other operating systems supported by Exchange Server 2016?

Due to the discontinuance of SmartScreen Filter updates for Exchange server, we encourage all customers to stop relying upon this capability on all supported operating systems. Installing the Exchange Edge role on supported operating systems other than Windows Server 2016 is not changed by today’s announcement. The Edge role will continue to be supported on non-Windows Server 2016 operating systems subject to the operating system lifecycle outlined at https://support.microsoft.com/lifecycle.

Help! My services are already crashing or I want to proactively avoid this

If you used the Install-AntiSpamAgents.ps1 to install content filtering on the Mailbox role:

  1. Find a suitable replacement for your email hygiene needs such as EOP or other 3rd party solution
  2. Run the Uninstall-AntiSpamAgents.ps1 from the \Scripts folder created by Setup during Exchange installation

If you are running the Edge role on Windows Server 2016:

  1. Delay deploying KB4013429 to your Edge role or uninstall the update if required to restore service
  2. Deploy the Edge role on Windows Server 2012 or Windows Servers 2012R2 (Preferred)

Support services is available for customers who may need further assistance

Exchange 2016/2013/2010 Updates March 2017

Today, the Exchange Team released the March updates for Exchange Server 2013 and 2016, as well as Exchange Server 2010 and 2007. The latter will receive its last update, as Exchange 2007 will reach end-of-life April 11, 2017.

As announced in December updates, Exchange 2013 CU16 and Exchange 2016 CU5 require .NET 4.6.2. The recommended upgrade paths:

  • If you are still on .NET 4.6.1, you can upgrade to .NET 4.6.2 prior of after installing the latest Cumulative Update.
  • If you are on .NET 4.52, upgrade to Exchange 2016 CU4 or Exchange 2013 CU15 if you are not already on that level, then upgrade to .NET 4.6.2, and finally upgrade to the the latest Cumulative Update.

The Cumulative Updates also include DST changes, which is also contained in the latest Rollups published for Exchange 2010 and 2007.

For a list of fixes in these updates, see below.

Exchange 2016 CU5

15.1.845.34

KB4012106

Download

UMLP

Exchange 2013 CU16

15.0.1293.2

KB4012112

Download

UMLP

Exchange 2010 SP3 Rollup 17

14.3.352.0

KB4011326

Download

  

Exchange 2007 SP3 Rollup 23

8.3.517.0

KB4011325

Download

  

Exchange 2016 CU5 fixes:

  • KB4015665 SyncDelivery logging folders and files are created in wrong location in Exchange Server 2016
  • KB4015664 A category name that has different case-sensitivity than an existing name is not created in Exchange Server 2016
  • KB4015663 “The message content has become corrupted” exception when email contains a UUE-encoded attachment in Exchange Server 2016
  • KB4015662 Deleted inline picture is displayed as attachment after you switch the message to plain text in Exchange Server 2016
  • KB4015213 Email is still sent to Inbox when the sender is deleted from the Trusted Contacts list in Exchange Server 2016
  • KB4013606 Search fails on Exchange Server 2016 or Exchange Server 2013
  • KB4012994 PostalAddressIndex element isn’t returning the correct value in Exchange Server 2016

Exchange 2013 CU16 fixes:

  • KB4013606 Search fails on Exchange Server 2016 or Exchange Server 2013

Notes:

Exchange 2016 CU5 doesn’t include schema changes, however, Exchange 2016 CU5 as well as Exchange 2013 CU16 may introduce RBAC changes in your environment. Where applicable, use setup /PrepareSchema to update the schema or /PrepareAD to apply RBAC changes, before deploying or updating Exchange servers. To verify this step has been performed, consult the Exchange schema overview.

When upgrading your Exchange 2013 or 2016 installation, don’t forget to put the server in maintenance mode when required. Do note that upgrading, before installing the Exchange binaries, setup will put the server in server-wide offline-mode.

Using Windows Management Framework (WMF)/PowerShell version 5 on anything earlier than Windows Server 2016 is not supported. Don’t install WMF5 on your Exchange servers running on Windows Server 2012 R2 or earlier.

When using Exchange hybrid deployments or Exchange Online Archiving (EOA), you are allowed to stay at least one version behind (n-1).

  • If you want to speed up the update process for systems without internet access, you can follow the procedure described here to disable publisher’s certificate revocation checking.
  • Cumulative Updates can be installed directly, i.e. no need to install RTM prior to installing Cumulative Updates.
  • Once installed, you can’t uninstall a Cumulative Update nor any of the installed Exchange server roles.
  • The order of upgrading servers with Cumulative Updates is irrelevant.

Caution: As for any update, I recommend to thoroughly test updates in a test environment prior to implementing them in production. When you lack such facilities, hold out a few days and monitor the comments on the original publication or forums for any issues.

Source

For Emergency case Shutdown all Running VM’s

In Emergency case (Power Lost, Backup Power Won’t Start, UPS battery gone bad) it’s fine that you have a script that will shutdown every running VM

######################################################################
# Shutdown All VM’s at Once Emergency case
######################################################################>
CLS
# write-host “Shutdown All VM’s at Once Emergency case”
$viserver = Read-Host ‘What is the name of the Virtual Center Server?’

$choice = “”
while ($choice -notmatch “[y|n]”){
     $choice = read-host “ARE YOU SURE ALL VM’s WILL SHUTDOWN? (Y/N)”
     }

if ($choice -eq “y”){
     Connect-VIServer $viserver
     $vmservers=Get-VM | Where-Object {$_.powerstate -eq ‘PoweredOn’}
     $vmservers | Shutdown-VMGuest -Confirm:$false
     }

Translate »