If you can‘t send an email with iOS 11 and an Outlook.com or Exchange mail account

You might not be able to send email with an Outlook.com, Office 365, or Exchange account until you update to iOS 11.0.1.

If your email account is hosted by Microsoft on Outlook.com or Office 365, or an Exchange Server 2016 running on Windows Server 2016, you might see this error message when you try to send an email with iOS 11: “Cannot Send Mail. The message was rejected by the server.”

To fix the issue, update to iOS 11.0.1 or later.

Exchange Server 2016 Cumulative Update 7 (KB4018115) and Exchange Server 2013 Cumulative Update 18 (KB4022631)

The latest set of Cumulative Updates for Exchange Server 2016 and Exchange Server 2013 are now available on the download center.  These releases include fixes to customer reported issues, all previously reported security/quality issues and updated functionality.

Minimum supported Forest Functional Level is now 2008R2

In our blog post, Active Directory Forest Functional Levels for Exchange Server 2016, we informed customers that Exchange Server 2016 would enforce a minimum 2008R2 Forest Functional Level requirement for Active Directory.  Cumulative Update 7 for Exchange Server 2016 will now enforce this requirement.  This change will require all domain controllers in a forest where Exchange is installed to be running Windows Server 2008R2 or higher.  Active Directory support for Exchange Server 2013 remains unchanged at this time.

Support for latest .NET Framework

The .NET team is preparing to release a new update to the framework, .NET Framework 4.7.1.  The Exchange Team will include support for .NET Framework 4.7.1 in our December Quarterly updates for Exchange Server 2013 and 2016, at which point it will be optional.  .NET Framework 4.7.1 will be required on Exchange Server 2013 and 2016 installations starting with our June 2018 quarterly releases.  Customers should plan to upgrade to .NET Framework 4.7.1 between the December 2017 and June 2018 quarterly releases.

The Exchange team has decided to skip supporting .NET 4.7.0 with Exchange Server.  We have done this not because of problems with the 4.7.0 version of the Framework, rather as an optimization to encourage adoption of the latest version.

Known unresolved issues in these releases

The following known issues exist in these releases and will be resolved in a future update:

  • Online Archive Folders created in O365 will not appear in the Outlook on the Web UI
  • Information protected e-Mails may show hyperlinks which are not fully translated to a supported, local language

Release Details

KB articles that describe the fixes in each release are available as follows:

Exchange Server 2016 Cumulative Update 7 does not include new updates to Active Directory Schema.  If upgrading from an older Exchange version or installing a new server, Active Directory updates may still be required.  These updates will apply automatically during setup if the logged on user has the required permissions.  If the Exchange Administrator lacks permissions to update Active Directory Schema, a Schema Admin must execute SETUP /PrepareSchema prior to the first Exchange Server installation or upgrade.  The Exchange Administrator should execute SETUP /PrepareAD to ensure RBAC roles are current.

Exchange Server 2013 Cumulative Update 18 does not include updates to Active Directory, but may add additional RBAC definitions to your existing configuration. PrepareAD should be executed prior to upgrading any servers to Cumulative Update 18. PrepareAD will run automatically during the first server upgrade if Exchange Setup detects this is required and the logged on user has sufficient permission.

Additional Information

Microsoft recommends all customers test the deployment of any update in their lab environment to determine the proper installation process for your production environment. For information on extending the schema and configuring Active Directory, please review the appropriate TechNet documentation.

Also, to prevent installation issues you should ensure that the Windows PowerShell Script Execution Policy is set to “Unrestricted” on the server being upgraded or installed. To verify the policy settings, run the Get-ExecutionPolicy cmdlet from PowerShell on the machine being upgraded. If the policies are NOT set to Unrestricted you should use the resolution steps in KB981474 to adjust the settings.

Reminder: Customers in hybrid deployments where Exchange is deployed on-premises and in the cloud, or who are using Exchange Online Archiving (EOA) with their on-premises Exchange deployment are required to deploy the most current (e.g., 2013 CU18, 2016 CU7) or the prior (e.g., 2013 CU17, 2016 CU6) Cumulative Update release.

For the latest information on Exchange Server and product announcements please see What’s New in Exchange Server 2016 and Exchange Server 2016 Release Notes.  You can also find updated information on Exchange Server 2013 in What’s New in Exchange Server 2013, Release Notes and product documentation available on TechNet.

Note: Documentation may not be fully available at the time this post is published.

Exchange Server 2016 online training courses now available

Microsoft announced the release of four new edX online training courses for Microsoft Exchange Server 2016. If you plan to implement Exchange Server 2016 or Exchange Online, or if you want to make sure that your implementation was done right, the Exchange Server 2016 online training courses are for you.

Course offerings include:

Each Exchange course is targeted to the IT professional audience, with hands-on labs that reinforce student learning. Students are graded on completing each module, as well as on module assessment exams and a final course exam. A Certificate can be earned by completing each course with a passing grade. Courses are self-paced, allowing IT professionals to build Exchange skills at their own pace as their schedules permit.

The first course, CLD208.1x: Microsoft Exchange Server 2016 Infrastructure, is free. The remaining three courses are for-fee courses at $49 USD per course.

edX is a massive open online course (MOOC) provider that was developed by MIT and Harvard University. The Microsoft Learning Experiences team has created a wide range of online training courses for edX, and these four Exchange courses are the team’s latest Office releases. They are the first of seven courses that cover the core skills an Exchange administrator needs to proficiently design, implement and manage an Exchange 2016 and Exchange Online implementation.

Source

Exchange Edge role on Windows Server 2016 is not Recommend

Exchange Team announcing an update to our support policy for Windows Server 2016 and Exchange Server 2016. At this time we do not recommend customers install the Exchange Edge role on Windows Server 2016. We also do not recommend customers enable antispam agents on the Exchange Mailbox role on Windows Server 2016 as outlined in Enable antispam functionality on Mailbox servers.

Why are we making this change?

In our post Deprecating support for SmartScreen in Outlook and Exchange, Microsoft announced we will no longer publish content filter updates for Exchange Server. We believe that Exchange customers will receive a better experience using Exchange Online Protection (EOP) for content filtering. We are also making this recommendation due to a conflict with the SmartScreen Filters shipped for Windows, Microsoft Edge and Internet Explorer browsers. Customers running Exchange Server 2016 on Windows Server 2016 without KB4013429 installed will encounter an Exchange uninstall failure when decommissioning a server. The failure is caused by a collision between the content filters shipped by Exchange and Windows which have conflicting configuration information in the Windows registry. This collision also impacts customers who install KB4013429 on a functional Exchange Server. After the KB is applied, the Exchange Transport Service will crash on startup if the content filter agent is enabled on the Exchange Server. The Edge role enables the filter by default and does not have a supported method to permanently remove the content filter agent. The new behavior introduced by KB4013429, combined with our product direction to discontinue filter updates, is causing us to deprecate this functionality in Exchange Server 2016 more quickly if Windows Server 2016 is in use.

What about other operating systems supported by Exchange Server 2016?

Due to the discontinuance of SmartScreen Filter updates for Exchange server, we encourage all customers to stop relying upon this capability on all supported operating systems. Installing the Exchange Edge role on supported operating systems other than Windows Server 2016 is not changed by today’s announcement. The Edge role will continue to be supported on non-Windows Server 2016 operating systems subject to the operating system lifecycle outlined at https://support.microsoft.com/lifecycle.

Help! My services are already crashing or I want to proactively avoid this

If you used the Install-AntiSpamAgents.ps1 to install content filtering on the Mailbox role:

  1. Find a suitable replacement for your email hygiene needs such as EOP or other 3rd party solution
  2. Run the Uninstall-AntiSpamAgents.ps1 from the \Scripts folder created by Setup during Exchange installation

If you are running the Edge role on Windows Server 2016:

  1. Delay deploying KB4013429 to your Edge role or uninstall the update if required to restore service
  2. Deploy the Edge role on Windows Server 2012 or Windows Servers 2012R2 (Preferred)

Support services is available for customers who may need further assistance

Exchange Online RPC over HTTP Deprecation(Outlook 2007) October 31 2017

Status: Active

Action Required by: October 31, 2017 at 5:59 PM UTC

Details: On October 31st, 2017, Exchange Online mailboxes in Office 365 will require connections from Outlook for Windows use MAPI over HTTP, our new method of connectivity and transport between Outlook for Windows and Exchange. In May of 2014, Microsoft introduced MAPI over HTTP as a replacement for RPC over HTTP. RPC over HTTP was a legacy connection protocol that is being deprecated from Exchange Online. Beginning October 31, 2017, Outlook for Windows clients using RPC over HTTP will be unable to access their Exchange Online mailbox. The necessary action depends on the version of Outlook in use in your organization. If you are using Outlook 2007 or earlier, you need to upgrade. Outlook 2007 does not contain support for the MAPI/HTTP protocol. We encourage you to update to the Office 365 ProPlus subscription, or access Outlook via the web browser (which is included in your current subscription plan). Outlook 2010-2016 customers will need to ensure their version of Outlook for Windows is set up to support MAPI/HTTP. At a minimum, you should ensure you have installed the December 2015 update. Lastly, ensure your Outlook clients are not using a registry key to block MAPI/HTTP.

Message Center: MC85988 – Potential service disruption for Outlook for Windows users

Posted: November 16, 2016

Additional Information: KB3201590: RPC over HTTP deprecated in Office 365 on October 31, 2017

Exchange Team has released Quarterly Exchange Updates

– A new Outlook on the web compose experience
– Support for .Net 4.6.2
– Change to Pre-Requisites installed by Setup
– Update on Windows Server 2016 support KB3206632
– Latest time zone updates
– Important Public Folder fix included in these releases

Exchange Server 2016 Cumulative Update 4 (KB3177106), Download, UM Lang Packs
Exchange Server 2013 Cumulative Update 15 (KB3197044), Download, UM Lang Packs
Exchange Server 2010 Service Pack 3 Update Rollup 16 (KB3184730), Download
Exchange Server 2007 Service Pack 3 Update Rollup 22 (KB3184712), Download

VMware AppVolumes the solution for Microsoft Outlook Cache problem with Office 365

Yesterday i attendant Experts Live. I followed the session: Winning hearts and minds of your users with an optimized VDI environment

I saw a interesting thing Using VMware App Volumes and User Environment Manager to Store the Microsoft Outlook Cache (.OST)

Interesting thing to test Smile

Cumulative Update 2 for Exchange Server 2016

.Net 4.6.1 Support

Support for .Net 4.6.1 is now available for Exchange Server 2016 and 2013 with these updates. We fully support customers upgrading servers running 4.5.2 to 4.6.1 without removing Exchange. We recommend that customers apply Exchange Server 2016 Cumulative Update 2 or Exchange Server 2013 Cumulative Update 13 before upgrading .Net FrameWork. Servers should be placed in maintenance mode during the upgrade as you would do when applying a Cumulative Update. Support for .Net 4.6.1 requires the following post release fixes for .Net as well.

Note: .Net 4.6.1 installation replaces the existing 4.5.2 installation. If you attempt to roll back the .Net 4.6.1 update, you will need to install .Net 4.5.2 again.

AutoReseed Support for BitLocker

Beginning with Exchange 2013 CU13 and Exchange 2016 CU2, the Disk Reclaimer function within AutoReseed supports BitLocker. By default, this feature is disabled. For more information on how to enable this functionality, please seeEnabling BitLocker on Exchange Servers.

SHA-2 Support for Self-Signed Certificates

The New-ExchangeCertificate cmdlet has been updated to produce a SHA-2 certificate for all self-signed certificates created by Exchange. Creating a SHA-2 certificate is the default behaviour for the cmdlet. Existing certificates will not automatically be regenerated but newly installed servers will receive SHA-2 certificates by default. Customers may opt to replace existing non-SHA2 certificates generated by previous releases as they see fit.

Migration to Modern Public Folder Resolved

The issue reported in KB3161916 has been resolved.

 

This cumulative update fixes the following issues:

This cumulative update also fixes the issues that are described in the KB 3160339 MS16-079: Security update for Microsoft Exchange: June 14, 2016 and KB 3134844 Cumulative Update 1 for Exchange Server 2016

Microsoft Knowledge Base articles.
This update also includes new daylight saving time (DST) updates for Exchange Server 2016. For more information about DST, go to Daylight Saving Time Help and Support Center.

Download: https://www.microsoft.com/en-us/download/details.aspx?id=52968

Configure your Exchange 2013 server with Configure-Echange2013.ps1 Updated to V3.2

Updated to V3.2

Change List:

# V1.0 Begin
# V1.1 Added Some New Options 12-10-2014
# V1.2 Added Hyper-V Best Practise & NTFS Partition Offset
# V1.3 Added KB2995145 .NET Framework 4.5 garbage collector heap Fix
# V1.4 Added Set Minimum Disk Space Warning level (180GB Default CU6 200GB CU5)
# V1.5 Added Some new features
# V1.6 Changed the Layout & Add Move Arbitration Mailbox
# V1.7 Added PST Export & KB2990117
# V1.8 Added Full backup, Database in GB and Mailbox Size in GB Export CSV
# V1.9 Added Outlook AnyWhere & SafetyNetHoldTime
# V2.0 Added Check DatacenterActivationMode, Get-DatabaseAvailabilityGroupNetwork, Add Static Route, Disable Replation Network on DAG, Database Copies Per Volume (AutoReseed)
# V2.1 Added Edge Subscription
# V2.2 Added Check Transaction Log Growth
# V2.3 Changed the Menu to Submenu’s
# V2.4 Added Check Database White Space
# V2.5 Added MAPI HTTP External URL
# V2.6 Fixed OWA Virtual URL & HTTP URL
# V2.7 Added Fixes & Mountpoints & Changed Set Minimum Disk Space Warning Level from REG to GlobalOverride
# V2.8 Maintaince Added
# V2.9 Set Power to Highperformance
# V3.0 Check of Microsoft.Exchange.Management.PowerShell.SnapIn is loaded
# V3.1 Added Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:*.domain.com & Set-OutlookProvider -Identity EXCH -CertPrincipalName msstd:*.domain.com
# V3.2 VMware Best Practises & Fixed soms things

Download: https://gallery.technet.microsoft.com/scriptcenter/Configure-Exchange-2013-e0ffb2a6

Cumulative Update 1 for Exchange Server 2016

Exchange Team released:  Cumulative Update 1 for Exchange Server 2016

Issues that the cumulative update fixes

KB 3139730 Edge Transport service crashes when you view the properties of a poison message in Exchange Server 2016
KB 3135689 A custom SAP ODI URI is removed by ActiveSync from an email message in an Exchange Server environment
KB 3135688 Preserves the web.config file for Outlook Web App when you apply a cumulative update in Exchange Server 2016
KB 3135601 Cyrillic characters are displayed as question marks when you run the “Export-PublicFolderStatistics.ps1” script in an Exchange Server 2016 environment
KB 3124242 Mailbox quota is not validated during migration to Exchange Server 2013 or Exchange Server 2016

Exchange Server 2016 Cumulative Update 1 (KB3134844), Download, UM Lang Packs