Windows Defender Browser Protection for Google Chrome

Safeguarding you from malicious websites

The Windows Defender Browser Protection extension for Google Chrome allows you to add an additional layer of protection when browsing online, powered by the same trusted intelligence found in Microsoft Edge. The extension alerts you about known malicious links, and gives you a clear path back to safety.

https://browserprotection.microsoft.com/learn.html

Exchange 2016 Cumulative Update 9 and Exchange 2013 Cumulative Update 20

On March 20, 2018 Microsoft has released two new quarterly updates:

  • Exchange 2016 Cumulative Update 9 (CU9)
  • Exchange 2013 Cumulative Update 20 (CU20)
TLS 1.2

There aren’t too many new features in these CUs. The most important ‘feature’ is that TLS 1.2 is now fully supported (most likely you already have TLS 1.2 only on your load balancer). This is extremely supported since Microsoft will support TLS 1.2 ONLY in Office 365 in the last quarter of this year (see the An Update on Office 365 Requiring TLS 1.2 Microsoft blog as well).

Dot.net Support

Support for .NET Framework 4.7.1, or the ongoing story about the .NET Framework. The .NET Framework 4.7.1 is fully supported by Exchange 2016 CU9 and Exchange 2013 CU20. Why is this important? For the upcoming CUs in three months (somewhere in June 2018) the .NET Framework 4.7.1 is mandatory, so you need these to be installed in order to install these upcoming CUs.

Please note that .NET Framework 4.7 is NOT supported!

If you are currently running an older CU of Exchange, for example Exchange 2013 CU12, you have to make an intermediate upgrade to Exchange 2013 CU15. Then upgrade to .NET Framework 4.6.2 and then upgrade to Exchange 2013 CU20. If you are running Exchange 2016 CU3 or CU4, you can upgrade to .NET Framework 4.6.2 and then upgrade to Exchange 2016 CU9.

Schema changes

If you are coming from a recent Exchange 2013 CU, there are no schema changes since the schema version (rangeUpper = 15312) hasn’t changed since Exchange 2013 CU7. However, since there can be changes in (for example) RBAC, it’s always a good practice to run the Setup.exe /PrepareAD command. For Exchange 2016, the schema version (rangeUpper = 15332) hasn’t changed since Exchange 2016 CU7.

As always, check the new CUs in your lab environment before installing into your production environment!!

Exchange 2016 CU9 Information and download Links
Exchange 2013 CU20 Information and download Links

Exchange Server 2013 enters the Extended Support phase of product lifecycle on April 10th, 2018. During Extended Support, products receive only updates defined as Critical consistent with the Security Update Guide. For Exchange Server 2013, critical updates will include any required product updates due to time zone definition changes.

Microsoft Deployment Toolkit 8450 Now Available

The Microsoft Deployment Toolkit (MDT), build 8450, is now available on the Microsoft Download Center. This update supports the Windows Assessment and Deployment Kit (ADK) for Windows 10, version 1709, available on the Microsoft Hardware Dev Center(adksetup.exe file version 10.1.16299.15).

Here is a summary of the significant changes in this build of MDT:

  • Supported configuration updates
    • Windows ADK for Windows 10, version 1709
    • Windows 10, version 1709
    • Configuration Manager, version 1710
  • Quality updates (titles of bug fixes)
    • Win10 Sideloaded App dependencies and license not installed
    • CaptureOnly task sequence doesn’t allow capturing an image
    • Error received when starting an MDT task sequence: Invalid DeploymentType value “” specified. The deployment will not proceed
    • ZTIMoveStateStore looks for the state store folder in the wrong location causing it to fail to move it
    • xml contains a simple typo that caused undesirable behavior
    • Install Roles & Features doesn’t work for Windows Server 2016 IIS Management Console feature
    • Browsing for OS images in the upgrade task sequence does not work when using folders
    • MDT tool improperly provisions the TPM into a Reduced Functionality State (see KB 4018657 for more information)
    • Updates to ZTIGather chassis type detection logic
    • Upgrade OS step leaves behind SetupComplete.cmd, breaking future deployments
    • Includes updated Configuration Manager task sequence binaries

See the following post on How to get help with MDT.

Exchange 2013 CU19

Exchange 2013 CU19 fixes:

  • 4046316 MAPI over HTTP can’t remove client sessions timely if using OAuth and the resource has a master account in Exchange Server 2013
  • 4046205 W3wp high CPU usage in Exchange Server 2013
  • 4046182 Event ID 4999 or 1007 if diagnostics service crashes repeatedly in Exchange Server 2013
  • 4056329 Can’t access EWS from Outlook/OWA add-ins via makeEwsRequestAsync in Exchange Server 2016 and Exchange Server 2013
  • 4045655 Description of the security update for Microsoft Exchange: December 12, 2017

Version

Build

KB Article

Download

UMLP

Schema Changes

Exchange 2013 CU19

15.0.1365.1

KB4037224

Download

UMLP

No

Exchange 2016 CU8 15.1.1415.2 KB4035145

Exchange 2016 CU8 fixes:

  • 4056329 Can’t access EWS from Outlook/OWA add-ins via makeEwsRequestAsync in Exchange Server 2016 and Exchange Server 2013
  • 4054516 “Your request can’t” error when accessing an archive mailbox via OWA in Exchange Server 2016
  • 4055953 The recipient scope setting doesn’t work for sibling domains in Exchange Server 2016
  • 4055435 No MAPI network interface is found after you install Exchange Server 2016 CU7
  • 4056609 Event ID 4999 and mailbox transport delivery service does not start after you install Exchange Server 2016 CU7
  • 4045655 Description of the security update for Microsoft Exchange: December 12, 2017
  • 4057248 Many Watson reports for StoragePermanentException in Exchange Server 2016

Version

Build

KB Article

Download

UMLP

Schema Changes

Exchange 2016 CU8

15.1.1415.2

KB4035145

Download

UMLP

Yes

Install VMware PowerCli

1. Install the Powershell Get Module

Installing items from the Gallery requires the latest version of the PowerShellGet module, which is available in Windows 10, in Windows Management Framework (WMF) 5.0, or in the MSI-based installer (for PowerShell 3 and 4).

With the latest PowerShellGet module, you can:

Supported Operating Systems

The PowerShellGet module requires PowerShell 3.0 or newer.

Therefore, PowerShellGet requires one of the following operating systems:

  • Windows 10
  • Windows 8.1 Pro
  • Windows 8.1 Enterprise
  • Windows 7 SP1
  • Windows Server 2016
  • Windows Server 2012 R2
  • Windows Server 2008 R2 SP1

PowerShellGet also requires .NET Framework 4.5 or above. You can install .NET Framework 4.5 or above from here.

2. Find-Module -Name VMware.PowerCLI

3. Install-Module -Name VMware.PowerCLI -Scope CurrentUser

4. When you start Powershell VMware.Powershell is automatically loaded

VMware Disk to Windows Disk Script

vCenter01

Credentials

ClusterNode

virtuelemachine

DiskInfo

Script: VMwareDisktoWindows.ps1

# VMware to Windows Disk Script                                    
#                                                                                                   
# Author     : Ward Vissers                                                                                
# created on : 08-11-2017                                                                                  
# version    : V1.0                                                                                         
# Source     : http://www.enterprisedaddy.com/2016/07/powercli-match-windows-disk-to-vmware-harddisk/  
#
# V0.1 Testing
# V0.2 Line 33 $vm to $vm.name(Bug Found)
# V0.3 Graphical Version Select VM
# V0.4 Add Select VM from Cluster
# V1.0 Add Selection of multiple vCenter                                                                                                      
#
# $VCServerList is a comma-separated list of vCenter servers
$VCServerList = “vCenter01.wardvissers.nl”
# Select vCenter
$VCServer = $VCServerList | Out-GridView -Title “Select vCenter Server” -OutputMode Single
# write-host $VCServer
$Cred = Get-Credential
# Write-Host $Cred
 
# Set Default Server Mode to Multiple
Set-PowerCLIConfiguration -DefaultVIServerMode Multiple -Confirm:$false | Out-Null
# Connect to vCenter Server(s)
Connect-VIServer -Server “$VCServer” | Out-Null
$DiskInfo= @()
# Select Cluster
$Cluster = Get-Cluster | Out-GridView -Title “Select Target Cluster Node” -OutputMode Single
# write-host $Cluster
# Select VM From Cluster
$Vm = Get-Cluster $Cluster | Get-VM | Out-GridView -Title “Select Virtuele Machine” -OutputMode Single
# write-host $vm

if (($VmView = Get-View -ViewType VirtualMachine -Filter @{“Name” = $Vm.Name})) {
  $WinDisks = Get-WmiObject -Class Win32_DiskDrive -Credential $Cred -ComputerName $VmView.Name
  foreach ($VirtualSCSIController in ($VMView.Config.Hardware.Device | where {$_.DeviceInfo.Label -match “SCSI Controller”})) {
foreach ($VirtualDiskDevice in ($VMView.Config.Hardware.Device | where {$_.ControllerKey -eq $VirtualSCSIController.Key})) {
  $VirtualDisk = “” | Select SCSIController, DiskName, SCSI_Id, DiskFile, DiskSize, WindowsDisk
  $VirtualDisk.SCSIController = $VirtualSCSIController.DeviceInfo.Label
  $VirtualDisk.DiskName = $VirtualDiskDevice.DeviceInfo.Label
  $VirtualDisk.SCSI_Id = “$($VirtualSCSIController.BusNumber) : $($VirtualDiskDevice.UnitNumber)”
$VirtualDisk.DiskFile = $VirtualDiskDevice.Backing.FileName
  $VirtualDisk.DiskSize = $VirtualDiskDevice.CapacityInKB * 1KB / 1GB
  # Match disks based on SCSI ID
  $DiskMatch = $WinDisks | ?{($_.SCSIPort – 2) -eq $VirtualSCSIController.BusNumber -and $_.SCSITargetID -eq $VirtualDiskDevice.UnitNumber}
  if ($DiskMatch){
  $VirtualDisk.WindowsDisk = “Disk $($DiskMatch.Index)”
}
else {Write-Host “No matching Windows disk found for SCSI id $($VirtualDisk.SCSI_Id)”}
  $DiskInfo += $VirtualDisk
  }
  }
  $DiskInfo | Out-GridView
  }
  else {Write-Host “Virtual Machine $Vm Not Found”}

Disconnect-VIServer * -Confirm:$false

Imported Hotfixes for Windows 2008 R2 Clustering

Imported Hotfixes for Windows 2008 R2 Clustering:

NTFS.sys

2814923          “0x0000009E” Stop error and disk volumes cannot be brought online on a Windows Server 2008 R2-based failover cluster
http://support.microsoft.com/kb/2814923/EN-US

MPIO

2754704          A hotfix is available that provides a mechanism for DSM to notify MPIO that a particular path is back to online in Windows Server 2008 and Windows Server 2008 R2
http://support.microsoft.com/kb/2754704/EN-US

storport.sys

2780444          “0x0000012E” Stop error occurs when an application sends a 12-byte SCSI opcode to an iSCSI target in Windows Vista SP2, Windows Server 2008 SP2, Windows 7 SP1, and Windows Server 2008 R2 SP1
http://support.microsoft.com/kb/2780444/EN-US

msiscsi

2684681          Iscsicpl.exe process stops responding when you try to reconnect a storage device to a computer that is running Windows Vista, Windows Server 2008, Windows 7, or Windows Server 2008 R2
http://support.microsoft.com/kb/2684681/EN-US

rdbss

2670567 “0x000000027” Stop error when you copy a file from a redirected folder in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2670567/EN-US

Kernel

2805853          “0x0000008E” Stop error on a computer that is running Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2805853/EN-US

RPCSS

2756999 Handle leak occurs on a COM client that is running on a Windows 7 or Windows Server 2008 R2 computer
http://support.microsoft.com/kb/2756999/EN-US

Mrxsmb10

2727324 Computer stops responding after you connect to an SMB 1 server in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2727324/EN-US

Mrxsmb20

2778834          File becomes corrupted when you try to overwrite the file while it is opened by another user on a computer that is running Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2778834/EN-US

TCPIP

2519644          Stop code in the tcpip.sys driver on a computer that is running Windows Server 2008 R2: 0x000000D1
http://support.microsoft.com/kb/2519644/EN-US

2524478          The network location profile changes from “Domain” to “Public” in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2524478/EN-US

Setting Cluster Time outs for Microsoft Clustering on vSphere

I created a little script that set the correct time outs:

mscstimeoutsonvsphere.ps1:
import-module failoverclusters
get-cluster | fl *subnet*
(get-cluster).SameSubnetDelay = 1000
(get-cluster).SameSubnetThreshold = 10
(get-cluster).CrossSubnetDelay = 2000
(get-cluster).CrossSubnetThreshold = 10
get-cluster | fl *subnet*

Source:
Microsoft Cluster Service (MSCS) support on ESXi/ESX (1004617)
Guidelines for Microsoft Clustering on vSphere (1037959)

If you can‘t send an email with iOS 11 and an Outlook.com or Exchange mail account

You might not be able to send email with an Outlook.com, Office 365, or Exchange account until you update to iOS 11.0.1.

If your email account is hosted by Microsoft on Outlook.com or Office 365, or an Exchange Server 2016 running on Windows Server 2016, you might see this error message when you try to send an email with iOS 11: “Cannot Send Mail. The message was rejected by the server.”

To fix the issue, update to iOS 11.0.1 or later.

Translate »